Replacement sidecar steering damper of the VW style. Used on sidecar outfits for over 40 years and is Metric. 14" long when closed, 20-1/2" long when fully extended. It has 6-1/2" of travel when fully extended. Shock end bushing is 10mm I.D. by 24mm wide. Stud end is 10mm.

Free shipping in the USA.

e-mail me for world wide shipping cost.

This is another version of the VW steering damper. It is 12 inches long when closed and 17-3/8 inches when extended all the way. Has 5-1/2 inches of travel. Shock end has a 10mm I.D. bushing. The small end is 10mm and threaded. This is the OEM style of steering damper used on many Harley Sidecar outfits. OEM #87141-83.

Free shipping in the USA.

e-mail me for world wide shipping cost.

1-1/2'' steering damper strut clamp mount: clamps on front sidecar strut or some crash bars. Steering damper attaches to clamp. Will only fit California Sidecar struts as they are 1-1/2'' O.D. and all other sidecar companies use 1-1/4'' or smaller strut. Clamp will fit many crash bars. Uses 3/8'' bolt in mount. Made by California Sidecar OEM NOS.

Free shipping in the USA.

email me for world wide shipping cost.

Motorcycle Fork Clamp 2'' I.D. chrome. Attaches to front fork of motorcycle and steering damper bolts to tab with 3/8'' mount. Made by California Sidecar OEM NOS.

Used on older Harley-Davidson Softail models.

Free shipping in the USA.

email me for world wide shipping cost.

Honda Goldwing 1200 Goldwing steering damper fork mounting bolt, chrome. Replace a bolt in the front brake caliper, I was told. It is longer and with a mounting tab for the end of the steering damper. Bolt is 3-1/2" long by 3/8'' with a 3/8'' I.D. hole in the mounting tab.

I do not have the installation instructions for this part so I am not sure if you will need to drill a new hole in the fork caliper mount or just use it to replace another mounting bolt in the caliper. Made by California Sidecar NOS OEM.

I have many in stock.

Free shipping in the USA.

email me for world wide shipping cost.

Honda Goldwing 1500 steering damper fork mounting bolt, chrome. It replace a bolt in the front brake caliper. The instructions say to drill a hole in the brake caliper mount tab on the fork and also in the cover. Bolt is longer and with a mounting tab for the end of the steering damper. Bolt is 4-1/4" long by 3/8'' with a 3/8'' I.D. hole in the mounting tab. Made by California Sidecar NOS OEM.

Sold out.

Replacement bushing for our VW sidecar steering dampers. 10mm I.D. by 24mm wide. Rubber at its widest is 24mm and in the V center 21mm.

Free shipping in the USA.

e-mail me for world wide shipping cost.

Male 10mm x 1.5 thread heim joint for metric VW sidecar steering damper. Mounting hole is 10mm and stud is 10mm x 1.5 mm thread. This will fit our VW sidecar steering damper.

Free shipping in the USA.

e-mail me for world wide shipping cost.

10 mm motorcycle sidecar female ball joint rod end with 10 mm x 1.5 mm threads. Ball end is 10 mm I.D. Will work with our VW steering dampers.

$19.50 with free shipping in the USA.

e-mail me for world wide shipping cost.

One sidecar steering damper 3/8-24 right hand thread heim joint with grease fitting. I.D. is 3/8". For steering damper custom fit. Will NOT work with VW damper as it is Metric.

Free shipping in the USA.

e-mail me for world wide shipping cost.

One sidecar steering damper ball joint rod end with grease fitting. Female 3/8"-24 right hand thread. For custom fit. Will NOT fit VW damper as it is Metric. Used on end of U-bolt to attach damper to front motorcycle fork. 

Free shipping in the USA.

e-mail me for world wide shipping cost.

Motorcycle Fork Clamp Chrome 2-1/2'': Attaches to front fork of motorcycle and steering damper bolts to tab with 3/8'' mount. Fits Harley-Davidson Touring Dressers and many other motorcycles. Made by California Sidecar NOS OEM.

Free shipping in USA.

email me for world wide shipping cost.

This is the Royal Enfield OEM Cozy Sidecar amber fender light replacement. It is 5" long by 2-5/8" Mounting screws are about 68mm center to center.

I have one in stock.

Free shipping in the USA.

e-mail me for world wide shipping cost. 

One Cozy Sidecar suspension slider rubber band. This is what the large o-ring sits on in the groove. Groove is 31mm wide, mounting hole is 31mm wide.

Free shipping in the USA.

e-mail me for world wide shipping cost.

OEM Champion Legend Sidecar seat hinge set. Comes with two 4" hinges that screw onto the bottom of the seat so the seat can fold foward. Also is the same style hinge as used on the fiberglass bucket seat in Easy Rider Sidecars and Spirit Of America Eagle Sidecars (see picture). Hinges have bearing in them and a rubber o-ring seal for smooth operation and for a long life of the hinge.

Free shipping in the USA.

e-mail me for world wide shipping cost.

Aluminum sidecar steering damper clamp mount. 32mm (1-1/4") I.D. will fit many USA made, sidecar struts like Champion Sidecar, California Sidecar, etc. Has a 8mm mounting hole. Finish looks great. Will not fit imported sidecars, they have smaller O.D. struts.

Free shipping in the USA.

e-mail me for world wide shipping cost.

Sold out.